1117金剛變形合體 ... KOSO 180cc DOHC kit
前往頁面 上一頁  1, 2, 3, 4, 5, 6, 7, 8  下一頁 快速轉頁:
 
發表新主題   回覆主題    重車論壇 首頁 -> :: 迷你車
上一篇主題 :: 下一篇主題  
發表人 內容
瘋狂小瑋

腳踏車騎士 (無照駕駛)
腳踏車騎士 (無照駕駛)
瘋狂小瑋

註冊時間: 2009-08-11
文章: 70
居住地: 台南

發表發表於: 星期四 三月 10, 2011 2:01 pm    文章主題: 引言回覆

不知道這個產品有沒有下文~~
價位到哪呢~~
我也想弄來我的新競戰試試..
回頂端
檢視會員個人資料 發送私人訊息 雅虎訊息通 職業 / 學校
KK32

150cc級騎士 (普通重型)
150cc級騎士 (普通重型)
KK32

註冊時間: 2007-06-29
文章: 342

發表發表於: 星期五 三月 11, 2011 9:36 am    文章主題: 引言回覆

瘋狂小瑋 寫到:
不知道這個產品有沒有下文~~
價位到哪呢~~
我也想弄來我的新競戰試試..


The 1st motor should be ready in the next few weeks. There is only 1 more parts we have to make and that is the custom crankshaft.

The 1st motor will be use for testing to see if everything work out ok. Only after the 1st motor is tested, will we start to produce more motors for sale in the future.
_________________
台灣無名 http://www.wretch.cc/blog/smonkey2010
回頂端
檢視會員個人資料 發送私人訊息
狗丙乾

小綿羊騎士 (輕型免許)
小綿羊騎士 (輕型免許)
狗丙乾

註冊時間: 2010-01-04
文章: 110
居住地: 台北

發表發表於: 星期三 三月 16, 2011 9:59 pm    文章主題: 引言回覆

再等一下 很快就可以看到成品
_________________
http://www.wretch.cc/blog/smonkey2010
回頂端
檢視會員個人資料 發送私人訊息 雅虎訊息通 職業 / 學校
夢幻本田

重 車 天 王
重 車 天 王
夢幻本田

註冊時間: 2007-10-14
文章: 4294
居住地: 阿彌陀佛

發表發表於: 星期六 三月 19, 2011 6:16 pm    文章主題: 引言回覆

狗丙乾 寫到:
再等一下 很快就可以看到成品

像看連續劇一樣 Smile ..超期待續集.... hero 成品出來一定實力驚人.. Smile
回頂端
檢視會員個人資料 發送私人訊息
Ducati 甜在心爆米花

重 車 達 人
重 車 達 人
Ducati 甜在心爆米花

註冊時間: 2009-12-19
文章: 3223
居住地: 越來越黑暗的~呆完!

發表發表於: 星期三 三月 23, 2011 2:05 am    文章主題: 引言回覆

我朋友~有裝了


叫我騎~~我不敢騎耶!!!................



因為速度很快!!


我怕抓不住.................
_________________
回頂端
檢視會員個人資料 發送私人訊息
狗丙乾

小綿羊騎士 (輕型免許)
小綿羊騎士 (輕型免許)
狗丙乾

註冊時間: 2010-01-04
文章: 110
居住地: 台北

發表發表於: 星期三 四月 06, 2011 5:11 pm    文章主題: 引言回覆






_________________
http://www.wretch.cc/blog/smonkey2010
回頂端
檢視會員個人資料 發送私人訊息 雅虎訊息通 職業 / 學校
狗丙乾

小綿羊騎士 (輕型免許)
小綿羊騎士 (輕型免許)
狗丙乾

註冊時間: 2010-01-04
文章: 110
居住地: 台北

發表發表於: 星期三 四月 06, 2011 9:13 pm    文章主題: 引言回覆





_________________
http://www.wretch.cc/blog/smonkey2010
回頂端
檢視會員個人資料 發送私人訊息 雅虎訊息通 職業 / 學校
夢幻本田

重 車 天 王
重 車 天 王
夢幻本田

註冊時間: 2007-10-14
文章: 4294
居住地: 阿彌陀佛

發表發表於: 星期四 四月 07, 2011 7:27 am    文章主題: 引言回覆

狗丙乾 寫到:

what 真是專業阿 Smile ....感謝分享... hoho 繼續期待 hehe
回頂端
檢視會員個人資料 發送私人訊息
KK32

150cc級騎士 (普通重型)
150cc級騎士 (普通重型)
KK32

註冊時間: 2007-06-29
文章: 342

發表發表於: 星期一 五月 16, 2011 12:29 pm    文章主題: 引言回覆

Just recieved some parts from BKK for our race motor that we have design.



3 set of gearboxs and 3 set of complete clutch system.




A friend of ours just bought a new DynoJet Machine and we will run our race motor on this dyno by this Thursday or Friday Surprised


Will make an update as the motor is being tested out this week hehe
_________________
台灣無名 http://www.wretch.cc/blog/smonkey2010
回頂端
檢視會員個人資料 發送私人訊息
KanGraoo

400cc級騎士 (大型重型)
400cc級騎士 (大型重型)
KanGraoo

註冊時間: 2009-03-15
文章: 594
居住地: 973

發表發表於: 星期一 五月 16, 2011 12:42 pm    文章主題: 引言回覆

Bravo!!! Nice work!!!

Aren't you going to bench test before put on the bike?
Hope to see the power map soon.
_________________
咬我阿, 笨蛋!!
回頂端
檢視會員個人資料 發送私人訊息
KK32

150cc級騎士 (普通重型)
150cc級騎士 (普通重型)
KK32

註冊時間: 2007-06-29
文章: 342

發表發表於: 星期一 五月 16, 2011 12:55 pm    文章主題: 引言回覆

KanGraoo 寫到:
Bravo!!! Nice work!!!

Aren't you going to bench test before put on the bike?
Hope to see the power map soon.


Thank you my friend Smile

Engine Dyno room in Taiwan are not readily available, only the bike dyno are available for us to use. We will installe this engine onto one of our test bike and run it for a day. Once we are sure that everything is running smooth, our plan is to move to the dyno machine by the 2nd day and get a hp reading from the dyno machine.

We been looking for engine dyno room to rent but they are not available for rent at all. For now, we are force to test our engine on the bench and on the road before we will take it for a full dyno test.

The key is to make sure that everything is running smooth before we test run it on the dyno hehe
_________________
台灣無名 http://www.wretch.cc/blog/smonkey2010
回頂端
檢視會員個人資料 發送私人訊息
KanGraoo

400cc級騎士 (大型重型)
400cc級騎士 (大型重型)
KanGraoo

註冊時間: 2009-03-15
文章: 594
居住地: 973

發表發表於: 星期一 五月 16, 2011 10:54 pm    文章主題: 引言回覆

I hear ya, when i saw the parametric modeling, for some unknown reason, I was VERY excited. lol
kind of wish I could be part of this experience.
Anyhow, I will keep follow you guys.
Wish your team the best luck at all. Smile
_________________
咬我阿, 笨蛋!!
回頂端
檢視會員個人資料 發送私人訊息
夢幻本田

重 車 天 王
重 車 天 王
夢幻本田

註冊時間: 2007-10-14
文章: 4294
居住地: 阿彌陀佛

發表發表於: 星期二 五月 17, 2011 10:02 am    文章主題: 引言回覆

KK32 寫到:
Just recieved some parts from BKK for our race motor that we have design.



A friend of ours just bought a new DynoJet Machine and we will run our race motor on this dyno by this Thursday or Friday Surprised


Will make an update as the motor is being tested out this week hehe

what 這未免也太專業了 Smile 這樣的測試..可以獲的更準確的改裝資訊..... Smile 真的很有新...呈現另一種不同層級的玩法 Smile hehe 期待新作
_________________
快樂騎車就好...騎車快樂就好...
回頂端
檢視會員個人資料 發送私人訊息
螺旋槳
大順

重 車 達 人
重 車 達 人
螺旋槳

註冊時間: 2009-07-21
文章: 3097
居住地: 六六大順

發表發表於: 星期二 五月 17, 2011 11:42 am    文章主題: 引言回覆

夢幻本田 寫到:
what 這未免也太專業了 Smile 這樣的測試..可以獲的更準確的改裝資訊..... Smile 真的很有新...呈現另一種不同層級的玩法 Smile hehe 期待新作



這是神人級才有的水準 Smile Smile Smile

我只能流口水羨慕中 Surprised

期待另類台灣之光 Smile
回頂端
檢視會員個人資料 發送私人訊息
KK32

150cc級騎士 (普通重型)
150cc級騎士 (普通重型)
KK32

註冊時間: 2007-06-29
文章: 342

發表發表於: 星期三 五月 18, 2011 3:01 pm    文章主題: 引言回覆

KanGraoo 寫到:
I hear ya, when i saw the parametric modeling, for some unknown reason, I was VERY excited. lol
kind of wish I could be part of this experience.
Anyhow, I will keep follow you guys.
Wish your team the best luck at all. Smile


Thanks buddy hehe

We are running late on one of our parts and won't be able to dyno the bike until sometime next week when the part arrive to us. Will make an update as soon as we start the motor Surprised
_________________
台灣無名 http://www.wretch.cc/blog/smonkey2010
回頂端
檢視會員個人資料 發送私人訊息
從之前的文章開始顯示:   
發表新主題   回覆主題    重車論壇 首頁 -> :: 迷你車 所有的時間均為 台灣時間 (GMT + 8 小時)
前往頁面 上一頁  1, 2, 3, 4, 5, 6, 7, 8  下一頁 快速轉頁:
6頁(共8頁)


前往:  
無法 在這個版面發表文章
無法 在這個版面回覆文章
無法 在這個版面編輯文章
無法 在這個版面刪除文章
無法 在這個版面進行投票