| 上一篇主題 :: 下一篇主題 |
| 發表人 |
內容 |
KK32
150cc級騎士 (普通重型)
註冊時間: 2007-06-29
文章: 342
|
 發表於: 星期三 五月 18, 2011 3:07 pm 文章主題: |
 |
|
夢幻本田 and 螺旋槳
These engines as you both know, will be exported to different countrys. Customers will expect the engine to be dyno and checked before it is for sale. We will need all the data and HP reading so customers can make the decision to buy our race engines 
_________________
台灣無名 http://www.wretch.cc/blog/smonkey2010 |
|
| 回頂端 |
|
 |
螺旋槳
大順
重 車 達 人
註冊時間: 2009-07-21
文章: 3097
居住地: 六六大順
|
| 發表於: 星期三 五月 18, 2011 8:00 pm 文章主題: |
|
|
| KK32 寫到: |
夢幻本田 and 螺旋槳
These engines as you both know, will be exported to different countrys. Customers will expect the engine to be dyno and checked before it is for sale. We will need all the data and HP reading so customers can make the decision to buy our race engines |
決定量產了嗎 |
|
| 回頂端 |
|
|
詠澤
750cc級騎士 (大型重型)
註冊時間: 2008-03-29
文章: 812
居住地: 新竹
|
| 發表於: 星期三 五月 18, 2011 9:02 pm 文章主題: |
|
|
期待喔 
_________________
我是新手 |
|
| 回頂端 |
|
|
KK32
150cc級騎士 (普通重型)
註冊時間: 2007-06-29
文章: 342
|
| 發表於: 星期四 五月 19, 2011 12:06 am 文章主題: |
|
|
| 螺旋槳 寫到: |
| 決定量產了嗎 |
Yes, there have been many interest from oversea shops to buy our engine so we will be exporting these engines to these shops oversea
_________________
台灣無名 http://www.wretch.cc/blog/smonkey2010 |
|
| 回頂端 |
|
|
KK32
150cc級騎士 (普通重型)
註冊時間: 2007-06-29
文章: 342
|
| 發表於: 星期六 六月 04, 2011 5:20 pm 文章主題: |
|
|
Our race motor was suppose to be ready for testing 2 weeks ago but we were stopped by a certain big Japanese company. This Japanese company have force the local crankshaft facotry from producing our crankshaft.
It is ok, we decided to use CNC machine to creat our own billet crankshaft.
Our CNC billet crankshaft taking form on the CNC machine.
One side ready 
Ready to be assemble after it is been heat treated : )
A video of our engine being test started : )
http://youtu.be/5zJXvk2Y-LM
This motor will be installed onto a second bike next week for test running and we will be doing extensive testing on this motor for the next 2 weeks 
_________________
台灣無名 http://www.wretch.cc/blog/smonkey2010 |
|
| 回頂端 |
|
|
狗丙乾
小綿羊騎士 (輕型免許)
註冊時間: 2010-01-04
文章: 110
居住地: 台北
|
|
| 回頂端 |
|
|
夢幻本田
重 車 天 王
註冊時間: 2007-10-14
文章: 4294
居住地: 阿彌陀佛
|
| 發表於: 星期一 六月 06, 2011 2:27 pm 文章主題: |
|
|
| KK32 寫到: |
Our CNC billet crankshaft taking form on the CNC machine.
This motor will be installed onto a second bike next week for test running and we will be doing extensive testing on this motor for the next 2 weeks |
真強  不過在開發的過程難免會遇到挫折需要再克服解決...這樣看下來...真不簡單
期待車子可以如願完美的呈現 
_________________
快樂騎車就好...騎車快樂就好...
夢幻本田 在 星期一 六月 06, 2011 2:51 pm 作了第 1 次修改 |
|
| 回頂端 |
|
|
夢幻本田
重 車 天 王
註冊時間: 2007-10-14
文章: 4294
居住地: 阿彌陀佛
|
| 發表於: 星期一 六月 06, 2011 2:28 pm 文章主題: |
|
|
| 狗丙乾 寫到: |
| 過幾天調整一下測試一下有幾批馬力 在等一下 |
想必又是大馬力怪獸 期待分享 ...
_________________
快樂騎車就好...騎車快樂就好... |
|
| 回頂端 |
|
|
Ninja星
阿星
重 車 太 子
註冊時間: 2006-09-24
文章: 3841
居住地: 甜在心饅頭店
|
| 發表於: 星期一 六月 06, 2011 2:30 pm 文章主題: |
|
|
會變 暴力猴  |
|
| 回頂端 |
|
|
KK32
150cc級騎士 (普通重型)
註冊時間: 2007-06-29
文章: 342
|
| 發表於: 星期一 六月 06, 2011 8:15 pm 文章主題: |
|
|
| 夢幻本田 寫到: |
真強 不過在開發的過程難免會遇到挫折需要再克服解決...這樣看下來...真不簡單
期待車子可以如願完美的呈現 |
Thank You Will update once we put the bike on the dyno test, to find out the HP figures
_________________
台灣無名 http://www.wretch.cc/blog/smonkey2010 |
|
| 回頂端 |
|
|
KK32
150cc級騎士 (普通重型)
註冊時間: 2007-06-29
文章: 342
|
| 發表於: 星期一 六月 06, 2011 8:18 pm 文章主題: |
|
|
| Ninja星 寫到: |
| 會變 暴力猴 |
This is just the beginning
Once this one is complete, we will introduce our 200cc version and our 245cc version
_________________
台灣無名 http://www.wretch.cc/blog/smonkey2010 |
|
| 回頂端 |
|
|
螺旋槳
大順
重 車 達 人
註冊時間: 2009-07-21
文章: 3097
居住地: 六六大順
|
| 發表於: 星期二 六月 07, 2011 12:20 am 文章主題: |
|
|
恭喜，恭喜 |
|
| 回頂端 |
|
|
KanGraoo
400cc級騎士 (大型重型)
註冊時間: 2009-03-15
文章: 594
居住地: 973
|
| 發表於: 星期日 六月 26, 2011 12:23 am 文章主題: |
|
|
any dyno update??? heheheh
_________________
咬我阿, 笨蛋!! |
|
| 回頂端 |
|
|
KK32
150cc級騎士 (普通重型)
註冊時間: 2007-06-29
文章: 342
|
| 發表於: 星期日 六月 26, 2011 3:00 pm 文章主題: |
|
|
| KanGraoo 寫到: |
| any dyno update??? heheheh |
There is a 2-3 weeks delay on our motors since our stator cover and waterpump have been redesign and this have delay us for 2-3 weeks.
We needed to relocate the waterpump and due to the waterpump needed to be relocated, we ended up having to redesign the DOHC cylinder head cover, the waterpump and the stator cover. These new parts will be with us in a week : )
This is what our motor will look like after the redesgin
If everything goes according to plan, we will be able to test out this motor on the Dyno machine sometime next week 
_________________
台灣無名 http://www.wretch.cc/blog/smonkey2010 |
|
| 回頂端 |
|
|
狗丙乾
小綿羊騎士 (輕型免許)
註冊時間: 2010-01-04
文章: 110
居住地: 台北
|
|
| 回頂端 |
|
|
|
